Clean throughout the rear part of the control arm - if they are old, remove any rust or excess material; if new, clean off the paint down to bare metal. Press in the bushing from the front. Bushing is positioned with lip facing forward (towards front of car, as indicated by arrow). Lubricate liberally (with wheel bearing grease) inside bushing where control arm goes.
For the offset bushings, you will position the hole towards the outside of the car as pictured. A set screw is recommended.
#FCC3036 and #FCO3036 Front Control Arm Bushing Set for BMW e30, e36, Z3 and M Roadster
